Ador Welding Machine CHAMP MIG 250

₹ 93,456.00

Quantity



Pack Qty : 1.0

Delivery Availability

PAN INDIA DELIVERY

100% Genuine Products

100% Secured Payments

Product Description

General Features :

CHAMP MIG 250 is IGBT inverter based welding outfit suitable for GMAW applications. The IGBT Power module, ferrite core and fast recovery diode are used as key device for power conversion and trans-mission to assure better efficiency and performance. The complete system consists of power source, wire feeder and MIG torch and interconnecting cables.

Details Of Complete System :

Sr. No.	Description	Champ Mig 250 A	Champ Mig 250 B
1	Power Source	ICVR 250	ICVR 250
2	Wire feeder	FEEDLITE 20 (NELR)	FEEDLITE 20 (NELR)
3	Torch	ADOR TW 252 (E)	ADOR MTG 250 (E)

Salient Features :

Inverter based GMAW outfit
High efficiency and high power factor – resulting energy saving
Auto “Weld Stop” when welding torch is taken away from weld job
Compatible to Power Generator Supply
Enhanced Reliability due to SMD technology
Digital Panel for adjusting the welding parameters
30% more Energy efficient than conventional machines
Maximum Power factor is 0.93
Excellent dynamic response enables superior arc characteristics. 2T, 4T operating modes
Electronic choke adjustment for better arc control
Crater voltage and Crater current adjustment through digital panel
Unique feature of Globule Detachment to stop formation of globules at the tip of wire at the end of welding
Automatic “Weld Stop” facility

Protection :

The equipment is provided with following protections.

Under Voltage and Over Voltage: Error message is displayed and the equipment shuts down if the supply voltage exceeds the positive or negative limits specified in the Technical Specifications
Over Temperature: Error message is displayed and the equipment shuts down if the temperature of the main power components exceeds the safe limits
Single Phasing Protection: Error message is displayed and the equipment shuts down if any one of the three phase supply line is absent (single-phasing prevention / protection)

Warranty :

One year from the date of commissioning. ADOR WELDING LIMITED warrants that all new equipment sold from Plant/Area Offices / Authorised Distributors are free from defects in materials and workmanship and will perform in full accordance with applicable specifications.

In view of continuous development, ADOR WELDING LIMITED reserves the right to modify/change the design and /or the specifications without any prior notice.
Backed by dedicated customer care package.

Product Specifications

Input Specifications

Input	Unit	ICVR 250
Input Supply
Voltage	Volt	415, +15%, -10%
Phase	No	3
Frequency	Hz	50/ 60
Input KVA
at 100% duty cycle	KVA	6.5
at No Load	KVA	0.19

Output Specification

Parameters	Unit	Value
Open Circuit Voltage	Volts +/-5%	65
Welding Current Range	Amp	50-250
Welding Current (40°C 10 minutes cycle)
at 100% duty cycle	Amp	195
Welding Voltage Range	Volt	16-34
Crater Current Range	Amp	50-250
Crater Voltage Range	Volt	16-34
Mode of operation	-	2 track, 4 track, Gas check, OCV check facility
Remote Control (on wire feeder)	-	For setting voltage & current
Power Factor	-	Max 0.93
Efficiency	%	83% at 100% duty cycle

General Specification

Parameters	Unit	Value
Compatibility to International standard		As per Std. EN60974-1
Wire feed speed	m/min	1.5-18
Suitable Welding Wire Diameter	mm	Steel 0.8,1.0 and 1.2
Ingress Protection	Class	IP23
Cooling	Type	Forced Air
Dimensions (Approx.)
Length	mm	500
Width	mm	260
Height	mm	470
Weight	Kg	26
Audio Noise Emission		70

Download User manual

Other Details

Dimension (CM) - L x B x H
Unit of Measurement
Weight	kg
Generic Type	MIG Welding Machine
Manufacturer Details	Ador Welding Ltd Survey No. 147, P.B. No. 2 Akurdi Chowk, Chinchwad , Pune, Maharashtra-411019, India Phone: +91-9540071236
Packer Details	Ador Welding Ltd Survey No. 147, P.B. No. 2 Akurdi Chowk, Chinchwad , Pune, Maharashtra-411019, India Phone: +91-9540071236
Country of Origin	India