48 hours

SKU # 1000122234


Bosch Plena Booster Amplifier 480W LBD1938/00

Bosch Plena Booster Amplifier 480W LBD1938/00


₹ 43,340.00

Quantity

Pack Qty : 1



Delivery Availability

 Estimated Dispatch Within 2 Days

EMI Available. 

On minimum purchase of ₹ 3000/-

PAN INDIA DELIVERY
100% Genuine Products
100% Secured Payments

Product Description

  • The LBD 193x amplifiers are powerful power amplifier in a 2U high 19”case (3U housing for LBD 1938) for rack mounting or tabletop use

  • The Bosch Plena power amplifier series with its varied amplification range fulfills a wide variety of public address requirements at a surprisingly low cost

  • The LBD193x amplifiers feature colorful LED bar on the front side to indicate the acoustic level of the signal in dB

  • LBD193x amplifiers have 100V input for slave operation of the amplifier, XLR loop in and loop through facility for ease of installation and 100V output as well as 70V output for connecting to the loudspeakers with line matching transformers,8ohm and 4ohm outputs for connecting to the Low impedance speakers

  • The output voltage can be selected between 100V and 70V internally

  • Additionally LBD1938/00 amplifier features a dual XLR inputs with priority switching

  • Gain or level control is located on the rear of the unit to avoid accidental setting change

  • The amplifier works on 24VDC power supply during emergency situations

  • Features

  • Wide range of power amplifier from 120W,240W and 480W

  • Multiple outputs - 70 V / 100 V and 8/4 ohm

  • Temperature controlled forced front to back ventilation, directly stackable

  • Mains, battery back-up, and pilot tone supervision

  • Dual inputs with priority switching (LBD1938)

  • Functions

  • Dependability

  • The amplifier is protected against overload and short circuits

  • A temperature-controlled fan ensures high reliability at high output levels and low acoustic noise at lower output levels

  • An overheat protection circuit switches off the power stage,if the internal temperature reaches a critical limit due to poor ventilation or overload

  • Input

  • The system has two balanced inputs with priority control,each with a loop-through facility

  • This makes it easy to connect remote systems that require priority control

  • An additional 100V line input is provided to connect the amplifier to a 100V loudspeaker line to provide more power to remote locations

  • Gain or level control is located on the rear of the unit to avoid accidental setting change

  • A meter with LED-bar shows the output level

  • Output

  • The amplifier has 70V and 100V outputs for constant voltage loudspeaker systems,and a low impedance output for 8 ohm or 4 ohm loudspeaker loads

  • LBD1938 amplifier also has priority controlled 100V outputs which can be used to route audio coming into priority and program inputs to the loudspeaker

  • The LBD1938/00 amplifier has priority input and program input on the rear which can be used for routing important or emergency announcements when the amplifier is being used as a independent amplifier(ex: with local music source connected to program input)

  • There are Priority input enable and Program input enable pins which are default off and default on respectively,when these enabled by a 24VDC signal then the respective inputs are activated

  • Whenever the priority enable input is supplied with continuous 24VDC signal,the program input is over-rided by the priority input

  • Note*Actual product image may vary from that shown on the picture

Product Specification

Brand

Bosch

Product Type

Amplifier

Product Model

LBD1938/00

Power Supply

Input Voltage

230VAC ±10% at 50/60Hz or 24VDC ±10%

Inrush current

19A at 230 VAC, 30A at 24 VDC

Performance

Rated Output(RMS)

480W

Power Reduction On Backup Power

-1 dB

Frequency Response

60 Hz to 18 kHz (+1 / -3 dB at -10 dB ref. rated output)

Distortion

<1% at rated power,1kHz

S/N (Flat At Maximum Volume)

> 90 dB

Power Consumption

Maximum Power Consumption

1600 VA

Mains Operation

Maximum Power

990W

-3 dB

715W

Pilot Tone

110W

Idle

25W

24V DC Operation

Maximum Power

32A (770W)

-3 dB

26A (625W)

Pilot Tone

3.8A (91W)

Idle

0.7A (17W)

Line Inputs

2 x

Connector

3-pin XLR, balanced

Sensitivity

1 V

>20k ohm

CMRR

>25 dB (50 Hz to 20 kHz)

Gain

40 dB

100V Input

Connector

Screw, unbalanced

Sensitivity

100 V

Impedance

330k ohm

Line Loop Through Output

2 x

Connector

3-pin XLR

Nominal Level

1V

Impedance

Direct connection to line input

Loudspeakers Outputs

3 x

Connector

Screw, floating

Direct Output

100 V, 70 V, 8/4 ohm

Priority Only (From Input 1)

100V/70V internally selectable

Music (Non-Priority) Only

100V/70V internally selectable

Environmental

Operating Temperature

-10 °C to +45 °C

Storage And Transport Temperature

-40 °C to +70 °C

Relative Humidity

<95%

Acoustic Noise Level Of Fan

<48dB SPL at 1m(maximum output)

Mounting

19" rack, 3U heigh

Colour

Charcoal

Warranty

As Per Manufacturer Terms And Conditions

Other Details

Dimension (CM) LxWxH

37 x 43 x 14.5

Unit Of Measurement

1 Piece

Weight

25 kg

Generic Name

Amplifiers

Manufacturer Details

Bosch Limited Post Box No: 3000,Hosur Road, Adugodi, Bangalore - 560030, India, Phone :18004258665

Packer Details

Bosch Limited Post Box No: 3000,Hosur Road, Adugodi, Bangalore - 560030, India, Phone :18004258665

Country Of Origin

India


Write a review



Your review has been posted...!

Purchase this product to review...!

Give your valuable Rating, Review Title & Comments...!

Holding down the CTRL key as you click a image, allows you to select more than one. Upload valid image file(s)..!

Purchase this product to review...!
Thank you for your valuable feedback..!
Sending..!
Average user rating

Rating/ 5

Overall Rating
5
80% Complete (danger)
4
3
2
1

Close X